Hydraulic Presses & Scrap Baling Machines — Made in Delhi

About Us

◆

Hydraulic Engineering, Built To Order.

Parrytech Hydraulics manufactures hydraulic presses, power packs, cylinders and scrap baling machines in Delhi for customers across India and abroad.

Up to
5000 Ton
Built
To Order
ISO
9001:2015
Global
Exports
Parrytech hydraulic press built at the Mundka works, Delhi
Since 2008Mundka Industrial Area, Delhi
01 Our Story

From A Mundka Workshop To The World

Three decades of hands-on hydraulics, a works in Mundka Industrial Area since 2008, and a recycling division added in 2019.

  1. The Roots

    Three Decades Of Hydraulics

    The founders spent years building, repairing and commissioning hydraulic presses on factory floors before setting up their own works. That practical experience still shapes how every Parrytech machine is sized and built.

  2. 2008

    Parrytech Hydraulics Begins Production

    On 22 September 2008 the company started manufacturing at Khasra No. 83/23, Mundka Industrial Area, New Delhi — hydraulic presses, power packs and cylinders built to order.

  3. 2019

    ISO 9001:2015 And A Recycling Division

    In 2019 the quality management system was certified to ISO 9001:2015, and Parrytech Recycling Balers was set up as a separate division for double, triple and four-side compression balers, continuous balers and paper balers.

  4. 2025

    Expanded To 3 Units

    Parrytech acquired new works and expanded to three manufacturing units, adding capacity for bigger presses and shorter delivery times.

  5. Today

    Up To 5000 Tonnes, Working Worldwide

    Presses, power packs and cylinders up to 5000 tonnes, 84 standard models, MRAI membership and machines installed in manufacturing and recycling plants across India and abroad.

Managing Directors of Parrytech Hydraulics at the Mundka office
Managing Directors, Parrytech Hydraulics
02 Leadership

The People Behind Parrytech

Parrytech is run by its founders, who are in the works every day — reviewing drawings, checking machines on trial and speaking to customers directly. Decisions on design, quality and delivery are taken on the shop floor, not in a distant office.

Mr Om Prakash SinghManaging Director
Mr Rishal Singh ShekhawatManaging Director

Parrytech Recycling Balers is led by Mr Bhupesh Singh Shekhawat and Mr Anil Shekhawat.

View Certificates
03 Our Facility

State-of-the-Art Infrastructure

Our works is laid out for heavy, high-tonnage builds: plate is cut, machined, welded, assembled and trial-run in one place, so quality and delivery dates stay in our own hands.

We work to strict quality standards and buy steel and hydraulic components only from certified suppliers in India and abroad, which lets us take on bulk and export orders and still deliver on time.

18,000Sq. Ft.Manufacturing facility
300+Skilled professionals
31Machines & cranes in-house
70TonLargest overhead crane

Hi-Tech Machines We Build With

CNC machining and turning centres that hold the tight tolerances every Parrytech press is built to.

RA-1270V CNC Vertical Machining Centre at Parrytech Hydraulics
RA-1270VCNC Vertical Machining Centre
Okuma Double Column 5-Axis CNC Machining Centre at Parrytech Hydraulics
Okuma Double Column5-Axis CNC Machining Centre
Union Horizontal Boring CNC Boring & Milling Machine at Parrytech Hydraulics
Union Horizontal BoringCNC Boring & Milling Machine
Alphaturn Prime CNC Lathe Heavy-Duty CNC Turning Centre at Parrytech Hydraulics
Alphaturn Prime CNC LatheHeavy-Duty CNC Turning Centre

Machine Shop

The machines that cut, turn, mill and lift every Parrytech press.

CNC & Conventional Lathes at Parrytech Hydraulics 15Units

CNC & Conventional Lathes

Pistons, rods, glands and every turned part.

Overhead Cranes, 5 to 70 Ton at Parrytech Hydraulics 6Units

Overhead Cranes, 5 to 70 Ton

Lifting capacity for the heaviest assemblies.

Conventional Drilling Machines at Parrytech Hydraulics 5Units

Conventional Drilling Machines

Drilling and tapping of plates, flanges and frames.

3-Axis VMC Machine at Parrytech Hydraulics

3-Axis VMC Machine

Vertical machining of frames, bolsters and platens.

5-Axis Double Column VMC at Parrytech Hydraulics

5-Axis Double Column VMC

Large, complex press parts machined in a single setup.

5-Axis CNC Horizontal Machining Centre at Parrytech Hydraulics

5-Axis CNC Horizontal Machining Centre

Accurate 5-axis boring, milling and facing of heavy components.

Surface Grinding Machine at Parrytech Hydraulics

Surface Grinding Machine

Flat, true guide ways and mating surfaces.

Messer Profile Cutting at Parrytech Hydraulics

Messer Profile Cutting

CNC profile cutting of heavy steel plate.

MIG & TIG Welding at Parrytech Hydraulics

MIG & TIG Welding

Advanced welding bays for frames and structures.

Guide Bar Case Hardening at Parrytech Hydraulics

Guide Bar Case Hardening

Hard-wearing guide bars made in-house.

Departments & Facilities

Everything a heavy press needs between the first drawing and dispatch.

  • Dedicated DepartmentsDesign, manufacturing, hydraulics and electrical teams under one roof.
  • Fabrication, Machining & AssemblySeparate zones so each stage runs without holding up the next.
  • Heavy Machine BuildingRoom to build and trial high-tonnage presses on the floor.
  • Cylinder Testing & AssemblyEvery cylinder pressure-tested before it goes on a machine.
  • Shot Blasting & PaintingBlasted, primed and painted for a long service life.
  • Central Swarf RemovalA clean machine shop with chips cleared from every station.

This set-up lets us deliver complex, high-tonnage hydraulic presses and custom machines with dependable performance.

Certified & Registered
  • ISO 9001:2015
  • MSME Udyam
  • IEC Exporter
  • MRAI Member
All certificates

Our Values

◆
Engineering First

Every press and baler is designed around the load, stroke and cycle it has to deliver.

Long-Term Support

Spares, repairs and upgrades for the full working life of the machine.

Custom Hydraulics

Circuits, cylinders and power packs designed in-house for your process.

Tested Before Dispatch

Every machine is trial-run under load at our works before it ships.

Global Supply

Machines installed in many countries, with commissioning by our own engineers.

3 DecadesOf Practical Experience
5000TMaximum Press Capacity
84Machines In Our Range
India & AbroadSupply Network

What We Take Care Of

◆

From the first drawing to the machine running in your plant, one team handles the whole job.

Design & Engineering

Press and baler sizing, hydraulic circuits and frame design.

In-House Fabrication

Frames, cylinders and power packs built in our Delhi works.

Dispatch & Export

Machines shipped across India and to many countries abroad.

Installation & Commissioning

On-site setup, trial run and operator training.

Repair & Maintenance

Service, spares and upgrades for the life of the machine.

04 Our Commitment

Tested Under Load, Backed By Service

Every machine is built from verified steel and branded hydraulic components, then trial-run at our works before it leaves for your plant. The same engineers who build it are the ones who install it and answer the phone afterwards.

  1. Verified MaterialsSteel plate and branded pumps, valves and seals from known sources.
  2. Pressure & Cycle ChecksWorking pressure, stroke and cycle time checked on every machine.
  3. Trial Run Under LoadEach press and baler is run under load at the works before dispatch.
  4. Installation & ServiceCommissioning, operator training, spares and after-sales support.

Our Process

◆

How a Parrytech machine goes from your requirement to production in your plant.

01
Requirement & Design

Component, material and output studied; press or baler sized to suit.

02
Steel & Hydraulics

Verified steel plate and branded pumps, valves and seals.

03
Fabrication & Assembly

Frame, cylinders and power pack built and assembled in-house.

04
Trial Run

Pressure, stroke and cycle checked under load before dispatch.

05
Installation

Commissioning, operator training and after-sales service.

Company Profile · Hydraulic Machinery

From A Mundka Workshop, Presses Of Up To 5,000 Tonnes Reach Factories Worldwide

Parrytech Hydraulics has built hydraulic presses, power packs and scrap balers to order since 2008 — and its founders bring three decades of hands-on experience to every machine.

NEW DELHI — On a lane behind Abhinandan Vatika in the Mundka Industrial Area, Parrytech Hydraulics designs and builds the machines that form pressure cookers, kitchen sinks, fire extinguisher bodies and automobile components. Production began on 22 September 2008, and the works now offers hydraulic presses, power packs and cylinders of up to 5,000 tonnes.

A Complete Range Under One Roof

The range covers hydraulic presses, deep draw presses, rubber and transfer moulding presses, cold and hot forging presses, compression moulding presses, SMC and DMC moulding presses, coining presses, sintering presses, scrap baling presses, broaching machines and special purpose machines. Presses of up to 3,000 tonnes are regularly supplied for automobile component forming.

All types of hydraulic press, power pack and cylinder up to 5,000 tonne capacity — built, tested and installed by one team.

Built Around The Job

Every order starts with the component, the material and the output the customer needs. Tonnage, bed size, stroke and cycle time are set from there, the frame and power pack are built in-house, and each machine is trial-run under load before dispatch. The firm competes on manufacturing quality, ease of maintenance and pricing, and plans every build around a delivery date.

A Second Division For Recycling

In 2019 the company set up Parrytech Recycling Balers to handle scrap processing: double, triple and four-side compression balers, continuous balers and horizontal paper balers for metal scrap, cardboard and plastic. The same year its quality management system was certified to ISO 9001:2015, and it is a member of the Material Recycling Association of India.

Who Buys Parrytech Machines

Customers range from kitchenware and cutlery makers in Kundli to steel and TMT producers in Jalna and laminations makers in Bangalore. The list includes Madina Group (Bangladesh), Mayur Steel Industries (Nepal), Umm Al Quwain, Prayag Polymers (Bhiwadi), M.B. Decco International (Kundli), Punjab Steels (Kundli), Orange Groups (Mumbai), Paayal Engineering (Odisha), Futura Kitchen Sink (Bangalore), MPR Refractories (Hyderabad), Powercam Electricals (Bahadurgarh), Designco (Moradabad), LLM Groups (Chennai), Jagdamba Cutlery (Kundli), Vinove Kitchenware (Kundli), Rajouri Steel TMT (Jalna), Amba Shakti TMT (Sikandrabad), Gaj Kesari Steels (Jalna), Galaxy Steels (Bangalore), Magcore Laminations (Bangalore) and Nidhi Auto (Noida).

Capacity And Reach

Machines are shipped across India and abroad to Nepal, Sri Lanka, Bangladesh, Bhutan, the UAE (Dubai), Nigeria, Kenya, South Africa and the European Union. Installation, operator training and after-sales service are handled by the company’s own engineers.

Google Rating 4.1 ★★★★★

See what customers say about Parrytech Hydraulics on Google.

Read Google Reviews
Proudly Made in IndiaDesigned, built and tested at our Delhi works.
Trial-Run TestedEvery machine run under load before dispatch.
India & ExportMachines working in many countries.
Installation SupportCommissioning and operator training on site.
Service & SparesRepair and maintenance for the life of the machine.